Swashbuckler Paper Airplane

The Swashbuckler loves big loops and turns. If you want a fun plane that's easy to fly, this is it!

How to Make a Swashbuckler Paper Airplane?

	Step 1: Start with a regular piece of rectangle paper that's 8.5 x 11.0 inches (215.9 x 279.4 mm).
	Step 2: Fold the top left corner to the right edge. Make sure the top right corner is as pointy as can be.
	Step 3: Unfold.
	Step 4: Now fold the top right corner to the left edge.
	Step 5: Unfold. There should now be a big X.
	Step 6: Turn the paper over horizontally.
	Step 7: Find the middle of the big X. Fold down the top half of the big X at the middle of the big X.
	Step 8: Unfold.
	Step 9: Fold the left half of the paper to the right.
	Step 10: Unfold.
	Step 11: Turn the paper over horizontally.
	Step 12: With your finger, poke the center of the big X and the center will pop in.
	Step 13: Bring the left and right edges in towards the center to create a triangle. Go to Next page to continue with the Swashbuckler Paper Airplane.
	Step 14: Fold the left and right triangle corners to the top point.
	Step 15: Fold the enter top of the triangle down to where the top point meets the bottom of the triangle.
	Step 16: Turn the paper over.
	Step 17: Fold the left half to the right.
	Step 18: Fold the wings while making sure the two corners (indicated by the two black arrows) come together.
	Step 19: At the edge of the wing, fold in the fin (about the width of your pinky). Click on "Like" below if you like the Swashbuckler!
	Step 20: Turn the paper over.
	Step 21: Fold the second wing to line up with the first wing.
	Step 22: Fold the fin for this wing as well.
	Step 23: Unfold the wings and fins.
	Step 24: Before flying, make sure the wings are tilted up a bit and the fins are standing straight up.
	Step 25: You can get a good hold of the plane if you hold it near the front like this. Now throw it up at an angle and watch it loop and swoop!

Swashbuckler Paper Airplane VIDEO